The Screw,close Tolerance, cataloged under National Stock Number 5305-01-383-5993, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-383-5993 |
| Primary Part Number | PNAS1993002-01 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Us Army Aviation and Missile Command |
| Status | ACTIVE |
| Fastener Length | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.338 INCHES NOMINAL IN |
| Material Document and Classification | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.2516 INCHES MINIMUM AND 0.3047 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PNAS1993002-01 | Us Army Aviation and Missile Command (USA) |
| Reference | Meaning |
|---|---|
| PNAS1993002-01 | 3/9 Design control — primary reference Lockheed Martin Corporation |
NSN 5305-01-383-5993 is a Screw,close Tolerance, manufactured by Us Army Aviation and Missile Command, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-383-5993 has 1 manufacturer part number on file: PNAS1993002-01 (Us Army Aviation and Missile Command).
Key specifications for PNAS1993002-01: Fastener Length: 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.338 INCHES NOMINAL IN; Material Document and Classification: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.