The Screw,close Tolerance, cataloged under National Stock Number 5305-01-382-6015, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-382-6015 |
| Primary Part Number | A174-18E |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Fastener Length | 2.400 INCHES MINIMUM AND 2.440 INCHES MAXIMUM IN |
| Thread Length | 0.459 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.871 INCHES MINIMUM AND 1.901 INCHES MAXIMUM IN |
| Grip Diameter | 0.2465 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Internal Drive Style | SLOT |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNF |
| Head Diameter | 0.452 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A174-18E PRIMARY | Naval Inventory Control Point Mechanicsburg (USA) |
NSN 5305-01-382-6015 is a Screw,close Tolerance, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-382-6015 has 1 manufacturer part number on file: A174-18E (Naval Inventory Control Point Mechanicsburg).
Key specifications for A174-18E: Fastener Length: 2.400 INCHES MINIMUM AND 2.440 INCHES MAXIMUM IN; Thread Length: 0.459 INCHES MINIMUM IN; Nominal Thread Diameter: 0.250 INCHES IN; Head Style: FLAT COUNTERSUNK. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.