The Screw,machine, cataloged under National Stock Number 5305-01-379-4170, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-379-4170 |
| Primary Part Number | 12387271-66 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Screw Surface Treatment | ZINC |
| Fastener Length | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Thread Length | 0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material | STEEL |
| Color | OLIVE DRAB |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12387271-66 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 5305-01-379-4170 is a Screw,machine, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-379-4170 has 1 manufacturer part number on file: 12387271-66 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 12387271-66: Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Screw Surface Treatment: ZINC; Fastener Length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Thread Length: 0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.