The Screw,machine, cataloged under National Stock Number 5305-01-375-7351, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-375-7351 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Surface Treatment | ENAMEL LUSTERLESS AND CHROMATE ZINC |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Head Surface Treatment Document and Classification | TT-E-527 FED SPEC 1ST TREATMENT RESPONSE OR MIL-P-8585 MIL SPEC 2ND TREATMENT RESPONSE |
| Screw Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7586433P0002 | 3/2 Design control — primary reference U.S. Government activity |
| 7586433P2 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-375-7351 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-375-7351: Fastener Length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Thread Length: 0.200 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.112 INCHES IN; Head Surface Treatment: ENAMEL LUSTERLESS AND CHROMATE ZINC. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.