The Screw,close Tolerance, cataloged under National Stock Number 5305-01-375-2387, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-375-2387 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.3135 INCHES MINIMUM AND 0.3165 INCHES MAXIMUM IN |
| Head Height | 0.188 INCHES NOMINAL IN |
| Fastener Length | 2.452 INCHES MINIMUM AND 2.499 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.656 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.4375 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS337A23 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.812 INCHES NOMINAL IN |
| Grip Diameter | 0.4358 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 4140 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS337A23 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-375-2387 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-375-2387: Width Across Flats: 0.3135 INCHES MINIMUM AND 0.3165 INCHES MAXIMUM IN; Head Height: 0.188 INCHES NOMINAL IN; Fastener Length: 2.452 INCHES MINIMUM AND 2.499 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.