PartsTable TECHNICAL DATA SHEET
NSN 5305-01-369-8885Government record, cited

Screw, Externally Relieved Body5305-01-369-8885

NSN 5305-01-369-8885 · NIIN 013698885 · Part number LO1540
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 16236
Government record, cited
NSN 5305-01-369-8885 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-369-8885. Manufacturer of record part number: LO1540.
Also searched as  5305-01-369-8885 · 5305013698885 · NIIN 013698885 · 01-369-8885 · FSC 5305 Screws · CAGE 16236 · LO1540 · 6155-56-SS-2520 · 63A141974PC2 · LL-HX8-3382 · P00489NRP
Nearby stock numbers  ·
Features
  • Screw,externally Relieved Body — FSC 5305
  • Head Height: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
  • Fastener Length: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
  • Criticality Code Justification: ZZZY
  • Material Document and Classification: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-369-8885
  • NIIN: 013698885
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: LO1540
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
General Description

The Screw,externally Relieved Body, cataloged under National Stock Number 5305-01-369-8885, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-369-8885
Primary Part NumberLO1540
Item NameScrew,externally Relieved Body
FSC / FSG5305 / 53 — Screws
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Head Height0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
Fastener Length1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
Criticality Code JustificationZZZY
Material Document and ClassificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
First Diameter From Head0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
Nominal Thread Diameter0.250 INCHES IN
Head StyleKNURLED NO. 4
Thread DirectionRIGHT-HAND
Point StyleCONE
Departure From Cited DocumentAS MODOIED BY MATERIAL AND LOCKING FEATURE (AS APPLICABLE)
Distance From Largest Bearing Surface of Head to End of First Diameter1.500 INCHES NOMINAL IN
Externally Relieved Body Diameter Quantity1
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleSLOT
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch20
MaterialSTEEL COMP 303 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Head Diameter0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
Part NumberManufacturer
LO1540 Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
Reference documents
ReferenceMeaning
6155-56-SS-2520 5/9 Secondary reference
New Haven Mfg Corp Amatom Electronic Hardware Div
63A141974PC2 3/1 Design control — primary reference
Lockheed Martin Corporation Div Rotary and Mission Systems
LL-HX8-3382 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
P00489NRP 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
6155-56-SS-2520 5/1 Secondary reference
Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-369-8885?

NSN 5305-01-369-8885 is a Screw,externally Relieved Body, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-369-8885?

NSN 5305-01-369-8885 has 1 manufacturer part number on file: LO1540 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).

What are the specifications of LO1540?

Key specifications for LO1540: Head Height: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN; Fastener Length: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-369-8885 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com