The Screw,tapping, cataloged under National Stock Number 5305-01-367-9275, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Federal Signal Corporation. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-367-9275 |
| Primary Part Number | 7011A122-08 |
| Item Name | Screw,tapping |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Federal Signal Corporation |
| Status | ACTIVE |
| Nonmachine Nominal Thread Diameter | 0.190 INCHES IN |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Fastener Length | 0.500 INCHES NOMINAL IN |
| Extended Washer Diameter | 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Nonmachine Thread Style | DOG TYPE (TYPE B OR C) |
| Head Style | HEXAGON EXTENDED WASHER |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Color | YELLOW OVERALL |
| Surface Treatment | ZINC OVERALL |
| Internal Drive Style | SLOT |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7011A122-08 | Federal Signal Corporation (USA) |
| Reference | Meaning |
|---|---|
| 7011A122-08 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-367-9275 is a Screw,tapping, manufactured by Federal Signal Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-367-9275 has 1 manufacturer part number on file: 7011A122-08 (Federal Signal Corporation).
Key specifications for 7011A122-08: Nonmachine Nominal Thread Diameter: 0.190 INCHES IN; Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Fastener Length: 0.500 INCHES NOMINAL IN; Extended Washer Diameter: 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.