The Screw,close Tolerance, cataloged under National Stock Number 5305-01-367-9274, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-367-9274 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.323 INCHES NOMINAL IN |
| Material Document and Classification | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.266 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS8703A5 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-367-9274 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-367-9274: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.