The Setscrew, cataloged under National Stock Number 5305-01-363-4156, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-363-4156 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.781 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN |
| Fastener Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,CL3,TY2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| Thread Length | 0.366 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Hardness Rating | 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | CONE |
| Locking Feature | PATCH OR PELLET OR STRIP THREADS |
| Locking Feature | PATCH LOCKING FEATURE |
| Surface Treatment | CADMIUM FASTENER |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | PLASTIC POLYAMIDE NYLON LOCKING FEATURE |
| Material | STEEL FASTENER |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS18067-30 | 5/9 Secondary reference U.S. Government activity |
| MIL-F-18240 | 4/1 Identification reference U.S. Government activity |
| MS18067-30 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-363-4156 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-363-4156: Width Across Flats: 0.781 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN; Fastener Length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,CL3,TY2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER; Thread Length: 0.366 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.