The Screw,close Tolerance, cataloged under National Stock Number 5305-01-362-9798, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-362-9798 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.106 INCHES NOMINAL FIRST HOLE IN |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1208 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.882 INCHES MINIMUM AND 1.902 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 1.007 INCHES MINIMUM AND 1.017 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1208-25D | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-362-9798 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-362-9798: Fastener Length: 2.000 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.