The Screw,machine, cataloged under National Stock Number 5305-01-362-2151, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-362-2151 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 1.208 INCHES NOMINAL IN |
| Thread Length | 1.146 INCHES MINIMUM AND 1.208 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 301 AND STEEL COMP 302 AND STEEL COMP 302B AND STEEL COMP 303 AND STEEL COMP 303SE AND STEEL COMP 304 AND STEEL COMP 304L AND STEEL COMP 305 AND STEEL COMP 308 AND STEEL COMP 309 AND STEEL COMP 309S AND STEEL COMP 310 AND STEEL COMP 310S AND STEEL COMP 314 AND STEEL COMP 316 AND STEEL COMP 316L AND STEEL COMP 317 AND STEEL COMP 321 AND STEEL COMP 347 AND STEEL COMP 348 AND STEEL COMP 384 AND STEEL COMP 385 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 RADIANS MINIMUM AND 101.0 RADIANS MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS24693-277B | 3/2 Design control — primary reference U.S. Government activity |
| MS24693-277B | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-362-2151 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-362-2151: Screw Surface Treatment: OXIDE; Fastener Length: 1.208 INCHES NOMINAL IN; Thread Length: 1.146 INCHES MINIMUM AND 1.208 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.