The Screw,close Tolerance, cataloged under National Stock Number 5305-01-356-8978, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-356-8978 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.1885 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM IN |
| Fastener Length | 3.953 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.531 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 3.428 INCHES MINIMUM AND 3.448 INCHES MAXIMUM IN |
| Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS335CA37 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-356-8978 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-356-8978: Width Across Flats: 0.1885 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM IN; Fastener Length: 3.953 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.531 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.