The Screw,tapping, cataloged under National Stock Number 5305-01-352-5832, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-352-5832 |
| Item Name | Screw,tapping |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Nonmachine Nominal Thread Diameter | 0.190 INCHES IN |
| Extended Washer Thickness | 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Fastener Length | 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Nonmachine Thread Style | BLUNT (SF) OR BLUNT (TYPE SW) OR BLUNT (TYPE TT) |
| Material Document and Classification | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Head Style | HEXAGON EXTENDED WASHER |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Material | STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-107 | 4/1 Identification reference U.S. Government activity |
| MS51869-14 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-352-5832 is a Screw,tapping, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-352-5832: Nonmachine Nominal Thread Diameter: 0.190 INCHES IN; Extended Washer Thickness: 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Fastener Length: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.