The Setscrew, cataloged under National Stock Number 5305-01-352-1150, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is North Wind Test Llc. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-352-1150 |
| Primary Part Number | 302785-001 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | North Wind Test Llc |
| Status | ACTIVE |
| Point Diameter | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN |
| Head Height | 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Point Length | 0.968 INCHES MINIMUM AND 1.032 INCHES MAXIMUM IN |
| Fastener Length | 13.468 INCHES MINIMUM AND 13.500 INCHES MAXIMUM IN |
| Thread Length | 13.000 INCHES NOMINAL IN |
| Hardness Rating | 40.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 1.500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 12 |
| Material | STEEL COMP 4140 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 302785-001 PRIMARY | North Wind Test Llc (USA) |
NSN 5305-01-352-1150 is a Setscrew, manufactured by North Wind Test Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-352-1150 has 1 manufacturer part number on file: 302785-001 (North Wind Test Llc).
Key specifications for 302785-001: Point Diameter: 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN; Head Height: 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Point Length: 0.968 INCHES MINIMUM AND 1.032 INCHES MAXIMUM IN; Fastener Length: 13.468 INCHES MINIMUM AND 13.500 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.