PartsTable TECHNICAL DATA SHEET
NSN 5305-01-351-4184Government record, cited

Screw, Close Tolerance5305-01-351-4184

NSN 5305-01-351-4184 · NIIN 013514184
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-351-4184 · 5305013514184 · NIIN 013514184 · 01-351-4184 · FSC 5305 Screws · BACB30WP5-11 · BACB30WP5-11 · BACB30WP5-11 · BACB30WP5-11 · BACB30WP5-11
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.469 INCHES NOMINAL IN
  • Material Document and Classification: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.312 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-351-4184
  • NIIN: 013514184
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-351-4184, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-351-4184
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.469 INCHES NOMINAL IN
Material Document and ClassificationAMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.312 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
Grip Diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleHIGH-TORQUE
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch24
MaterialNICKEL ALLOY 718 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
BACB30WP5-11 5/9 Secondary reference
Hi-Shear Corporation
BACB30WP5-11 5/9 Secondary reference
U.S. Government activity
BACB30WP5-11 5/9 Secondary reference
U.S. Government activity
BACB30WP5-11 C/1 Advisory reference — outside the item-of-supply concept
Huck International, Inc
BACB30WP5-11 5/9 Secondary reference
U.S. Government activity
BACB30WP5-11 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-351-4184?

NSN 5305-01-351-4184 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-351-4184?

Key specifications for 5305-01-351-4184: Fastener Length: 1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.469 INCHES NOMINAL IN; Material Document and Classification: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-351-4184 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com