The Screw,machine, cataloged under National Stock Number 5305-01-347-9028, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-347-9028 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Bearing Surface of Head Surface Finish | 32.0 MICROINCHES |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN |
| Thread Length | 0.819 INCHES NOMINAL IN |
| Shank Surface Finish | 32.0 MICROINCHES |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Thread Surface Finish | 32.0 MICROINCHES |
| Specification/standard Data | 80205-NAS1219 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | IRON ALLOY 660 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.461 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1219-4E16P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-347-9028 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-347-9028: Bearing Surface of Head Surface Finish: 32.0 MICROINCHES; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN; Thread Length: 0.819 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.