The Screw,shoulder, cataloged under National Stock Number 5305-01-344-6727, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-344-6727 |
| Item Name | Screw,shoulder |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM IN |
| Head Height | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Fastener Length | 0.947 INCHES NOMINAL IN |
| Shoulder Length | 0.597 INCHES MINIMUM AND 0.607 INCHES MAXIMUM FIRST SHOULDER IN |
| Surface Treatment Document and Classification | MIL-C-13924 CL1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Shoulder Diameter | 0.287 INCHES MINIMUM AND 0.290 INCHES MAXIMUM FIRST SHOULDER IN |
| Thread Length | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN |
| Shoulder Shape | ROUND FIRST SHOULDER |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | OXIDE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5905248 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-344-6727 is a Screw,shoulder, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-344-6727: Width Across Flats: 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM IN; Head Height: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 0.947 INCHES NOMINAL IN; Shoulder Length: 0.597 INCHES MINIMUM AND 0.607 INCHES MAXIMUM FIRST SHOULDER IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.