The Screw,close Tolerance, cataloged under National Stock Number 5305-01-342-8580, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies Llc Dba PB Fasteners Div PB Fasteners. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-342-8580 |
| Primary Part Number | PBF1475-4-10 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.034 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.425 INCHES NOMINAL IN |
| Material Document and Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| PBF1475-4-10 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| VCL0009-4-10 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| Reference | Meaning |
|---|---|
| VLC0009-4-10 | 5/9 Secondary reference Valley-Todeco, Inc. Dba Arconic Fastening Systems |
| GB510FG4-10 | 5/2 Secondary reference U.S. Government activity |
| GB510FG4-10 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5305-01-342-8580 is a Screw,close Tolerance, manufactured by Sps Technologies Llc Dba PB Fasteners Div PB Fasteners, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-342-8580 has 2 manufacturer part numbers on file: PBF1475-4-10 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), VCL0009-4-10 (Valley-Todeco, Inc. Dba Arconic Fastening Systems).
Key specifications for PBF1475-4-10: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.034 INCHES MINIMUM AND 1.081 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.