The Screw,close Tolerance, cataloged under National Stock Number 5305-01-337-5969, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-337-5969 |
| Primary Part Number | HT359RNE5-13 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Fastener Length | 1.297 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN |
| Thread Length | 0.501 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Features Provided | O RING |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN |
| Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | PHOSPHATE FASTENER |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.602 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT359RNE5-13 PRIMARY | Naval Inventory Control Point Mechanicsburg (USA) |
| HT359RNE5-13 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5305-01-337-5969 is a Screw,close Tolerance, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-337-5969 has 2 manufacturer part numbers on file: HT359RNE5-13 (Naval Inventory Control Point Mechanicsburg), HT359RNE5-13 (Hi-Shear Corporation).
Key specifications for HT359RNE5-13: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN; Fastener Length: 1.297 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN; Thread Length: 0.501 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.