The Screw,close Tolerance, cataloged under National Stock Number 5305-01-336-3215, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-336-3215 |
| Primary Part Number | 03A161-3D4P |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
| Status | ACTIVE |
| Fastener Length | 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.406 INCHES MINIMUM AND 0.456 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| X007-3D4P | Huck International, Inc (USA) |
| 03A161-3D4P PRIMARY | Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems (USA) |
| Reference | Meaning |
|---|---|
| 123741-3D4P | 5/9 Secondary reference U.S. Government activity |
| 03A161-3D4P | 5/9 Secondary reference Northrop Grumman Systems Corp Dba Northrop Grumman Computing Systems |
| PBF1419-3D4P | 5/9 Secondary reference Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| VCL0008-3D4P | 5/9 Secondary reference Valley-Todeco, Inc. Dba Arconic Fastening Systems |
| SLB217-3D4P | 5/9 Secondary reference Space-Lok, Inc. Dba Space-Lok Inc Div Space-Lok |
| X007-3D4P | 5/9 Secondary reference U.S. Government activity |
| HR242-3D4P | 5/9 Secondary reference Hi-Shear Corporation |
| AIC4410-3D4P | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
NSN 5305-01-336-3215 is a Screw,close Tolerance, manufactured by Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-336-3215 has 2 manufacturer part numbers on file: X007-3D4P (Huck International, Inc), 03A161-3D4P (Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems).
Key specifications for 03A161-3D4P: Fastener Length: 0.580 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.