PartsTable TECHNICAL DATA SHEET
NSN 5305-01-335-7411Government record, cited

Screw, Machine5305-01-335-7411

NSN 5305-01-335-7411 · NIIN 013357411
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-335-7411 · 5305013357411 · NIIN 013357411 · 01-335-7411 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Extended Washer Thickness: 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
  • Head Height: 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
  • Screw Surface Treatment: CADMIUM AND CHROMATE
  • Fastener Length: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
  • Screw Material Document and Classification: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
  • Extended Washer Diameter: 0.413 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
  • Thread Length: 0.528 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
Identification
  • NSN: 5305-01-335-7411
  • NIIN: 013357411
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-335-7411, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-335-7411
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Extended Washer Thickness0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
Head Height0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
Screw Surface TreatmentCADMIUM AND CHROMATE
Fastener Length0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
Screw Material Document and ClassificationMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
Extended Washer Diameter0.413 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
Thread Length0.528 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
Nominal Thread Diameter0.190 INCHES IN
Head StyleFILLISTER EXTENDED WASHER
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS8303 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Screw MaterialSTEEL COMP 4340 OR STEEL COMP 8740
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Thread Class3A A
Thread Quantity Per Inch32
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.353 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS8303-10 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-335-7411?

NSN 5305-01-335-7411 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-335-7411?

Key specifications for 5305-01-335-7411: Extended Washer Thickness: 0.030 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN; Head Height: 0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-335-7411 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com