The Setscrew, cataloged under National Stock Number 5305-01-330-9752, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-330-9752 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN |
| Fastener Length | 0.312 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| Thread Length | 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM FASTENER |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | CONE |
| Specification/standard Data | 80205-NAS1081 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Locking Feature | PATCH OR PELLET OR STRIP THREADS |
| Surface Treatment | CADMIUM AND CHROMATE FASTENER |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | PLASTIC POLYAMIDE NYLON LOCKING FEATURE |
| Material | STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8630 OR STEEL COMP 8740 FASTENER |
| Thread Series Designator | UNJC |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1081-04B5 | 3/2 Design control — primary reference U.S. Government activity |
| MS51973-104 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-330-9752 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-330-9752: Width Across Flats: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN; Fastener Length: 0.312 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER; Thread Length: 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.