The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-326-7582, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-326-7582 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.375 INCHES NOMINAL IN |
| Fastener Length | 1.000 INCHES NOMINAL IN |
| Thread Length | 0.530 INCHES NOMINAL IN |
| Material Document and Classification | QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE FASTENER |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 4 TYPE |
| Locking Feature | PATCH OR PELLET OR STRIP THREADS |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 40000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 11 |
| Material | PLASTIC POLYAMIDE NYLON LOCKING FEATURE |
| Material | NICKEL ALLOY 400 FASTENER |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 1.002 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| EB-3115 | 3/2 Design control — primary reference U.S. Government activity |
| FF-S-86 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-326-7582 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-326-7582: Width Across Flats: 0.375 INCHES NOMINAL IN; Fastener Length: 1.000 INCHES NOMINAL IN; Thread Length: 0.530 INCHES NOMINAL IN; Material Document and Classification: QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE FASTENER. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.