The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-325-2737, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-325-2737 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES NOMINAL IN |
| Head Height | 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Fastener Length | 1.125 INCHES NOMINAL IN |
| Thread Length | 1.025 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-N-281 CLA FED SPEC SINGLE MATERIAL RESPONSE FASTENER |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | N TYPE |
| Locking Feature | PELLET OR STRIP THREADS |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 40000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | NICKEL ALLOY 400 FASTENER |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 0.250-20 UNC-3A X 1.125 IN LG | 3/1 Design control — primary reference U.S. Government activity |
| FF-S-86 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-325-2737 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-325-2737: Width Across Flats: 0.188 INCHES NOMINAL IN; Head Height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Fastener Length: 1.125 INCHES NOMINAL IN; Thread Length: 1.025 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.