PartsTable TECHNICAL DATA SHEET
NSN 5305-01-325-1500Government record, cited

Screw, Machine5305-01-325-1500

NSN 5305-01-325-1500 · NIIN 013251500 · Part number PO0046NRP
Defense Logistics Agency Dba Defense Supply Center Philadelphia · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 14153
Government record, cited
NSN 5305-01-325-1500 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-325-1500. Manufacturer of record part number: PO0046NRP.
Also searched as  5305-01-325-1500 · 5305013251500 · NIIN 013251500 · 01-325-1500 · FSC 5305 Screws · CAGE 14153 · PO0046NRP · KNH83B · LL-HX6-8744
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Head Height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
  • Screw Surface Treatment: PASSIVATE
  • Fastener Length: 1.782 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 1.720 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
  • Criticality Code Justification: ZZZY
  • Nominal Thread Diameter: 0.138 INCHES IN
Identification
  • NSN: 5305-01-325-1500
  • NIIN: 013251500
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: PO0046NRP
  • Manufacturer: Defense Logistics Agency Dba Defense Supply Center Philadelphia
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-325-1500, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Defense Logistics Agency Dba Defense Supply Center Philadelphia. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-325-1500
Primary Part NumberPO0046NRP
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
ManufacturerDefense Logistics Agency Dba Defense Supply Center Philadelphia
StatusACTIVE
Head Height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
Screw Surface TreatmentPASSIVATE
Fastener Length1.782 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length1.720 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
Criticality Code JustificationZZZY
Nominal Thread Diameter0.138 INCHES IN
Head StylePAN
Thread DirectionRIGHT-HAND
Screw MaterialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Internal Drive StyleCROSS RECESS TYPE 1
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch32
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
Head Diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
Part NumberManufacturer
PO0046NRP Defense Logistics Agency Dba Defense Supply Center Philadelphia (USA)
Reference documents
ReferenceMeaning
KNH83B 3/1 Design control — primary reference
Eaton Aerospace Llc Dba Eaton Inoac Div Fluid & Electrical Distribution
LL-HX6-8744 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-325-1500?

NSN 5305-01-325-1500 is a Screw,machine, manufactured by Defense Logistics Agency Dba Defense Supply Center Philadelphia, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-325-1500?

NSN 5305-01-325-1500 has 1 manufacturer part number on file: PO0046NRP (Defense Logistics Agency Dba Defense Supply Center Philadelphia).

What are the specifications of PO0046NRP?

Key specifications for PO0046NRP: Head Height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 1.782 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-325-1500 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com