The Screw,machine, cataloged under National Stock Number 5305-01-321-2655, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-321-2655 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | ANODIZE |
| Fastener Length | 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.279 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Screw Material | ALUMINUM ALLOY 2024 |
| Minimum Tensile Strength | 62000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 36 |
| Thread Series Designator | UNF |
| Head Diameter | 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-A-8625 TY 1 OR TY 2 CL1 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS24693A249 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-321-2655 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-321-2655: Screw Surface Treatment: ANODIZE; Fastener Length: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.279 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.