The Screw,close Tolerance, cataloged under National Stock Number 5305-01-318-5301, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-318-5301 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.070 INCHES NOMINAL IN |
| Fastener Length | 1.611 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY II,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.491 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN |
| Grip Diameter | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1581A5T18 | 5/9 Secondary reference U.S. Government activity |
| NAS1581F5T18 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-318-5301 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-318-5301: Head Height: 0.070 INCHES NOMINAL IN; Fastener Length: 1.611 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY II,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.491 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.