The Screw,machine, cataloged under National Stock Number 5305-01-317-5403, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-317-5403 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.110 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Document | ASDIFFERENTIATED BY HEAD STYLE |
| Nondefinitive Spec/std Data | 3 TYPE AND 2C STYLE |
| Screw Material | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS51959-13 | 2/1 Government specification standardization U.S. Government activity |
NSN 5305-01-317-5403 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-317-5403: Head Height: 0.048 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Thread Length: 0.110 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.