PartsTable TECHNICAL DATA SHEET
NSN 5305-01-310-5825Government record, cited

Screw, Close Tolerance5305-01-310-5825

NSN 5305-01-310-5825 · NIIN 013105825
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-310-5825 · 5305013105825 · NIIN 013105825 · 01-310-5825 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Width Across Flats: 0.2197 INCHES MINIMUM AND 0.2217 INCHES MAXIMUM IN
  • Fastener Length: 2.813 INCHES MINIMUM AND 2.860 INCHES MAXIMUM IN
  • Thread Length: 0.641 INCHES NOMINAL IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Shank Unthreaded Hole Diameter: 0.106 INCHES NOMINAL FIRST HOLE IN
  • Nominal Thread Diameter: 0.375 INCHES IN
  • Head Style: FLAT COUNTERSUNK
Identification
  • NSN: 5305-01-310-5825
  • NIIN: 013105825
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-310-5825, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-310-5825
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.2197 INCHES MINIMUM AND 0.2217 INCHES MAXIMUM IN
Fastener Length2.813 INCHES MINIMUM AND 2.860 INCHES MAXIMUM IN
Thread Length0.641 INCHES NOMINAL IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.106 INCHES NOMINAL FIRST HOLE IN
Nominal Thread Diameter0.375 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length2.188 INCHES NOMINAL IN
Grip Diameter0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
Head Diameter0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS336CA26 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-310-5825?

NSN 5305-01-310-5825 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-310-5825?

Key specifications for 5305-01-310-5825: Width Across Flats: 0.2197 INCHES MINIMUM AND 0.2217 INCHES MAXIMUM IN; Fastener Length: 2.813 INCHES MINIMUM AND 2.860 INCHES MAXIMUM IN; Thread Length: 0.641 INCHES NOMINAL IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-310-5825 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com