The Screw,shoulder, cataloged under National Stock Number 5305-01-308-8200, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-308-8200 |
| Item Name | Screw,shoulder |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.388 INCHES MINIMUM AND 1.418 INCHES MAXIMUM IN |
| Shoulder Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM FIRST SHOULDER IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Shoulder Diameter | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER IN |
| Thread Length | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN |
| Shoulder Shape | ROUND FIRST SHOULDER |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1580A4T16Y | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-308-8200 is a Screw,shoulder, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-308-8200: Fastener Length: 1.388 INCHES MINIMUM AND 1.418 INCHES MAXIMUM IN; Shoulder Length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM FIRST SHOULDER IN; Surface Treatment Document and Classification: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Shoulder Diameter: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.