The Screw,machine, cataloged under National Stock Number 5305-01-302-2424, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-302-2424 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.898 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN |
| Thread Length | 0.773 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24693C143 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| MS24693-C143 | 5/9 Secondary reference U.S. Government activity |
| MS24693C143 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-302-2424 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-302-2424: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.898 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN; Thread Length: 0.773 INCHES MINIMUM IN; Nominal Thread Diameter: 0.375 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.