PartsTable TECHNICAL DATA SHEET
NSN 5305-01-300-5188Government record, cited

Screw, Machine5305-01-300-5188

NSN 5305-01-300-5188 · NIIN 013005188
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-300-5188 · 5305013005188 · NIIN 013005188 · 01-300-5188 · FSC 5305 Screws · MS24693S339 · FF-S-92 · NASM24693S339
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Screw Surface Treatment: CADMIUM AND CHROMATE
  • Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
  • Screw Material Document and Classification: 66 FED STD ALL MATERIAL RESPONSES
  • Thread Length: 0.377 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
  • Nominal Thread Diameter: 0.375 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-300-5188
  • NIIN: 013005188
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-300-5188, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-300-5188
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Screw Surface TreatmentCADMIUM AND CHROMATE
Fastener Length0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
Screw Material Document and Classification66 FED STD ALL MATERIAL RESPONSES
Thread Length0.377 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
Nominal Thread Diameter0.375 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Nondefinitive Spec/std Data3 TYPE AND 3C STYLE
Screw MaterialSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1031 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040
Minimum Tensile Strength60000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE II
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class2A A
Thread Quantity Per Inch24
Thread Series DesignatorUNF
Head Diameter0.670 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS24693S339 5/9 Secondary reference
U.S. Government activity
FF-S-92 5/9 Secondary reference
U.S. Government activity
NASM24693S339 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-300-5188?

NSN 5305-01-300-5188 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-300-5188?

Key specifications for 5305-01-300-5188: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Screw Material Document and Classification: 66 FED STD ALL MATERIAL RESPONSES; Thread Length: 0.377 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-300-5188 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com