The Screw,machine, cataloged under National Stock Number 5305-01-298-9731, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-298-9731 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE OR OXIDE |
| Fastener Length | 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Thread Length | 0.366 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.125 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE OR 2C STYLE |
| Screw Material | COPPER ALLOY |
| Color | BLACK |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.232 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN505PB5-8 | 2/2 Government specification standardization U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| 069461 | 5/9 Secondary reference Big Joe Mfg Co |
NSN 5305-01-298-9731 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-298-9731: Screw Surface Treatment: CADMIUM AND CHROMATE OR OXIDE; Fastener Length: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Thread Length: 0.366 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.125 INCHES IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.