The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-297-7526, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-297-7526 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN |
| Fastener Length | 2.062 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| Thread Length | 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| Material Document and Classification | SAE J429 GR 5 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 10P STYLE |
| Locking Feature | STRIP OR PATCH THREADS |
| Surface Treatment | CADMIUM AND CHROMATE FASTENER |
| Minimum Tensile Strength | 120000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 13 |
| Material | PLASTIC POLYAMIDE NYLON LOCKING FEATURE |
| Material | STEEL FASTENER |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| MS51095-417L | 5/9 Secondary reference U.S. Government activity |
| MS51095-417L | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-297-7526 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-297-7526: Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN; Fastener Length: 2.062 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER; Thread Length: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.