The Screw,close Tolerance, cataloged under National Stock Number 5305-01-292-6314, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-292-6314 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.723 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-16,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.348 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1580A3T22 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.185 INCHES MINIMUM AND 1.322 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1580A3T22 | 3/2 Design control — primary reference U.S. Government activity |
| 5305PL0884201 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5305-01-292-6314 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-292-6314: Fastener Length: 1.723 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-16,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.348 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.