The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-286-5437, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-286-5437 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN |
| Head Height | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Fastener Length | 0.745 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.552 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN |
| Material Document and Classification | ASTM B574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | NICKEL ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6560W11P004 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-286-5437 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-286-5437: Width Across Flats: 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN; Head Height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN; Fastener Length: 0.745 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.