The Setscrew, cataloged under National Stock Number 5305-01-282-9980, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-282-9980 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.544 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN |
| Fastener Length | 2.320 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 2.120 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN |
| Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | SQUARE |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY SURFACE TREATMENT |
| Point Style | CUP |
| Width Between Flats | 0.729 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 1 TYPE AND 4 STYLE |
| Surface Treatment | ZINC OVERALL |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 10 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-210 | 4/1 Identification reference U.S. Government activity |
| MS51955-110 | 2/1 Government specification standardization U.S. Government activity |
NSN 5305-01-282-9980 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-282-9980: Head Height: 0.544 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN; Fastener Length: 2.320 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 2.120 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.