The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-282-0646, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-282-0646 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Fastener Length | 2.703 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Nominal Thread Diameter | 0.438 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN7H25A | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-282-0646 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-282-0646: Head Height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Fastener Length: 2.703 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.