The Screw,close Tolerance, cataloged under National Stock Number 5305-01-280-8709, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-280-8709 |
| Primary Part Number | HR243E3-14 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Fastener Length | 1.223 INCHES MINIMUM AND 1.253 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| Thread Length | 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN |
| Material Document and Classification | AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE FASTENER |
| Material Document and Classification | MIL-R-6855 CL1 GR 60 MIL SPEC SINGLE MATERIAL RESPONSE RING |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Features Provided | O RING AND CETYL ALCOHOL LUBRICANT |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN |
| Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE FASTENER |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE-SET RIBBED |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 8740 FASTENER |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HR243E3-14 PRIMARY | Naval Inventory Control Point Mechanicsburg (USA) |
| Reference | Meaning |
|---|---|
| 123463S3-14 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-280-8709 is a Screw,close Tolerance, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-280-8709 has 1 manufacturer part number on file: HR243E3-14 (Naval Inventory Control Point Mechanicsburg).
Key specifications for HR243E3-14: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.