The Screw,close Tolerance, cataloged under National Stock Number 5305-01-280-6739, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-280-6739 |
| Primary Part Number | HT4068-4D17A |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Fastener Length | 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-83488,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.373 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Features Provided | CETYL ALCOHOL LUBRICANT |
| Head Style | OVAL COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.395 INCHES MINIMUM AND 1.435 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 11883-4DL17 | Reid Products Inc. Dba Reid Products Inc (USA) |
| HT4068-4D17A | Sps Technologies, Llc Dba PB Fasteners (USA) |
| 3M926-4DL17 | The Boeing Company Div Defense (USA) |
| HT4068-4D17A PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HT4068-4D17A PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HT4068-4D17A | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HT4068-4D17A | 5/9 Secondary reference U.S. Government activity |
| HT4068-4D17A | 5/9 Secondary reference U.S. Government activity |
| 10113638 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 3M926-4DL17 | 5/2 Secondary reference U.S. Government activity |
| 3M926-4DL17 | 5/2 Secondary reference U.S. Government activity |
| HT4068-4D17A | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
NSN 5305-01-280-6739 is a Screw,close Tolerance, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-280-6739 has 5 manufacturer part numbers on file: 11883-4DL17 (Reid Products Inc. Dba Reid Products Inc), HT4068-4D17A (Sps Technologies, Llc Dba PB Fasteners), 3M926-4DL17 (The Boeing Company Div Defense), HT4068-4D17A (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HT4068-4D17A (Hi-Shear Corporation).
Key specifications for HT4068-4D17A: Fastener Length: 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-83488,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.373 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.