The Screw,close Tolerance, cataloged under National Stock Number 5305-01-276-4874, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-276-4874 |
| Primary Part Number | GB510CE4-15 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.334 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY2 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-8837 TY2 CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.315 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HR204JK-4-15 | Hi-Shear Corporation (USA) |
| SCD1779-4-15 | Howmet Global Fastening Systems Inc (USA) |
| HR204JK-4-15 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| GB510CE4-15 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| PB1202-4-15 | 5/9 Secondary reference Harter Group the |
| 106706T-4-A15 | 5/2 Secondary reference U.S. Government activity |
| GB510CE4-15 | 5/9 Secondary reference Harter Group the |
NSN 5305-01-276-4874 is a Screw,close Tolerance, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-276-4874 has 4 manufacturer part numbers on file: HR204JK-4-15 (Hi-Shear Corporation), SCD1779-4-15 (Howmet Global Fastening Systems Inc), HR204JK-4-15 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), GB510CE4-15 (Northrop Grumman Systems Corporation).
Key specifications for GB510CE4-15: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.334 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.