PartsTable TECHNICAL DATA SHEET
NSN 5305-01-276-0864Government record, cited

Screw, Cap, Hexagon Head5305-01-276-0864

NSN 5305-01-276-0864 · NIIN 012760864
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-276-0864 · 5305012760864 · NIIN 012760864 · 01-276-0864 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,cap,hexagon Head — FSC 5305
  • Head Height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
  • Fastener Length: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
  • Thread Length: 0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
  • Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
  • Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.437 INCHES IN
Identification
  • NSN: 5305-01-276-0864
  • NIIN: 012760864
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-276-0864, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-276-0864
Item NameScrew,cap,hexagon Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
Fastener Length1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Thread Length0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
Hardness Rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationMIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.437 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Width Between Flats0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch20
MaterialSTEEL COMP 431 OVERALL
Thread Series DesignatorUNF
Distance From Head Largest Bearing Surface to Shank Hole Center1.280 INCHES MINIMUM AND 1.312 INCHES MAXIMUM FIRST HOLE IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
AN7C13 2/2 Government specification standardization
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-276-0864?

NSN 5305-01-276-0864 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-276-0864?

Key specifications for 5305-01-276-0864: Head Height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Fastener Length: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Thread Length: 0.625 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-276-0864 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com