PartsTable TECHNICAL DATA SHEET
NSN 5305-01-270-8914Government record, cited

Screw, Cap, Socket Head5305-01-270-8914

NSN 5305-01-270-8914 · NIIN 012708914
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-270-8914 · 5305012708914 · NIIN 012708914 · 01-270-8914 · FSC 5305 Screws · FF-S-86 · MS24667-14L · MS24667-14PL · MS-24667-14L
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.094 INCHES NOMINAL IN
  • Fastener Length: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.164 INCHES IN
Identification
  • NSN: 5305-01-270-8914
  • NIIN: 012708914
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-270-8914, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-270-8914
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.094 INCHES NOMINAL IN
Fastener Length0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
Material Document and Classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.164 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Locking FeatureSTRIP OR PATCH THREADS
Surface TreatmentCHROMATE AND CADMIUM OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Countersink Angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
FF-S-86 4/1 Identification reference
U.S. Government activity
MS24667-14L 5/9 Secondary reference
U.S. Government activity
MS24667-14PL 3/2 Design control — primary reference
U.S. Government activity
MS-24667-14L C/1 Advisory reference — outside the item-of-supply concept
Zf Industrieantriebe Witten Gmbh
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-270-8914?

NSN 5305-01-270-8914 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-270-8914?

Key specifications for 5305-01-270-8914: Width Across Flats: 0.094 INCHES NOMINAL IN; Fastener Length: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-270-8914 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com