PartsTable TECHNICAL DATA SHEET
NSN 5305-01-270-3056Government record, cited

Screw, Close Tolerance5305-01-270-3056

NSN 5305-01-270-3056 · NIIN 012703056 · Part number AIC985A4-8
Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 06725
Government record, cited
NSN 5305-01-270-3056 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-270-3056. Manufacturer of record part number: AIC985A4-8.
Also searched as  5305-01-270-3056 · 5305012703056 · NIIN 012703056 · 01-270-3056 · FSC 5305 Screws · CAGE 06725 · AIC985A4-8 · VT1694W4-8 · C7985A4-8 · 5305PL0784017 · 121558-4-A8W
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Fastener Length: 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN
  • Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5305-01-270-3056
  • NIIN: 012703056
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: AIC985A4-8
  • Manufacturer: Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-270-3056, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-270-3056
Primary Part NumberAIC985A4-8
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerSps Technologies, Llc Dba Air Industries Company Div Air Industries Company
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Fastener Length0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN
Hardness Rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Features ProvidedDRY FILM LUBRICANT
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
Grip Diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentALUMINUM AND CHROMATE OVERALL
Minimum Tensile Strength220000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP H11 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
AIC985A4-8 PRIMARY Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA)
H185A4-8 Huck International, Inc (USA)
PBF1166A4-8 Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA)
Reference documents
ReferenceMeaning
VT1694W4-8 5/2 Secondary reference
U.S. Government activity
C7985A4-8 7/2 Vendor item drawing reference
U.S. Government activity
5305PL0784017 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
121558-4-A8W 5/2 Secondary reference
U.S. Government activity
5305PL1941829 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
H185A4-8 5/9 Secondary reference
U.S. Government activity
5305PL1941832 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-270-3056?

NSN 5305-01-270-3056 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-270-3056?

NSN 5305-01-270-3056 has 3 manufacturer part numbers on file: AIC985A4-8 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), H185A4-8 (Huck International, Inc), PBF1166A4-8 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners).

What are the specifications of AIC985A4-8?

Key specifications for AIC985A4-8: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-270-3056 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com