The Screw,close Tolerance, cataloged under National Stock Number 5305-01-262-7886, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-262-7886 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.313 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Fastener Length | 2.605 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.596 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM LOCKING FEATURE |
| Shank Unthreaded Hole Diameter | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| Material Document and Classification | AMS 5673 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | CROWNED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.688 INCHES MINIMUM AND 1.704 INCHES MAXIMUM IN |
| Width Between Flats | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN |
| Grip Diameter | 0.6236 INCHES MINIMUM AND 0.6241 INCHES MAXIMUM IN |
| Locking Feature | DETENT BALL GRIP |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 63000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 631 OR STEEL COMP 302 SPRING |
| Material | STEEL COMP XM-13 FASTENER |
| Material | STEEL CORROSION RESISTING LOCKING FEATURE |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS3369B-1027 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-262-7886 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-262-7886: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.313 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN; Fastener Length: 2.605 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.