The Screw,close Tolerance, cataloged under National Stock Number 5305-01-262-6738, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-262-6738 |
| Primary Part Number | H044-3-3R |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Fastener Length | 0.4955 INCHES MINIMUM AND 0.5255 INCHES MAXIMUM IN |
| Thread Length | 0.323 INCHES NOMINAL IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.1775 INCHES MINIMUM AND 0.1975 INCHES MAXIMUM IN |
| Grip Diameter | 0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| C7984-3-3R | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| C7984-3-3R | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| H044-3-3R PRIMARY | Huck International, Inc (USA) |
| C7984-3-3R | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| H044-3-3R | 5/9 Secondary reference U.S. Government activity |
| AIC984-3-3R | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| AIC984-3-3PR | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| C7984-3-3R | 7/2 Vendor item drawing reference U.S. Government activity |
| VT1693F33-R | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-262-6738 is a Screw,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-262-6738 has 4 manufacturer part numbers on file: C7984-3-3R (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), C7984-3-3R (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), H044-3-3R (Huck International, Inc), C7984-3-3R (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for H044-3-3R: Fastener Length: 0.4955 INCHES MINIMUM AND 0.5255 INCHES MAXIMUM IN; Thread Length: 0.323 INCHES NOMINAL IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL; Material Document and Classification: AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.