The Setscrew, cataloged under National Stock Number 5305-01-260-9826, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Goodrich Corporation. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-260-9826 |
| Primary Part Number | 2007669-1 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Goodrich Corporation |
| Status | ACTIVE |
| Point Diameter | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Head Height | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN |
| Point Length | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Fastener Length | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Criticality Code Justification | FEAT |
| Hole Configuration Style | ROUND |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 30.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.062 INCHES NOMINAL IN |
| Head Diameter | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Part Number | Manufacturer |
|---|---|
| 2007669-1 PRIMARY | Goodrich Corporation (USA) |
| Reference | Meaning |
|---|---|
| 2007669-1 | 3/9 Design control — primary reference Goodrich Corp Dba Goodrich Corp |
| 5305PL0784001 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5305-01-260-9826 is a Setscrew, manufactured by Goodrich Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-260-9826 has 1 manufacturer part number on file: 2007669-1 (Goodrich Corporation).
Key specifications for 2007669-1: Point Diameter: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Head Height: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN; Point Length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Fastener Length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.