PartsTable TECHNICAL DATA SHEET
NSN 5305-01-256-6890Government record, cited

Screw, Close Tolerance5305-01-256-6890

NSN 5305-01-256-6890 · NIIN 012566890
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-256-6890 · 5305012566890 · NIIN 012566890 · 01-256-6890 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Fastener Length: 3.063 INCHES MINIMUM AND 3.093 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.928 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Nominal Thread Diameter: 0.625 INCHES IN
Identification
  • NSN: 5305-01-256-6890
  • NIIN: 012566890
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-256-6890, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-256-6890
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Fastener Length3.063 INCHES MINIMUM AND 3.093 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.928 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Nominal Thread Diameter0.625 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS590 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
Grip Diameter0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch18
MaterialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter1.201 INCHES MINIMUM AND 1.272 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-288-2831NAS5903-4 POSSIBLE MATCH
SCREW,MACHINE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS590-34 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5305-01-288-2831POSSIBLE MATCH
SCREW,MACHINE
NAS5903-4

Frequently Asked Questions

What is NSN 5305-01-256-6890?

NSN 5305-01-256-6890 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-256-6890?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-288-2831. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-256-6890?

Key specifications for 5305-01-256-6890: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 3.063 INCHES MINIMUM AND 3.093 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-256-6890 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com