The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-256-6873, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Deere & Co. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-256-6873 |
| Primary Part Number | T35306 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Deere & Co |
| Status | ACTIVE |
| Extended Washer Thickness | 0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Head Height | 0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN |
| Fastener Length | 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Extended Washer Diameter | 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN |
| Thread Length | 1.278 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Material Document and Classification | JDM A17F CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | HEXAGON EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.620 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 11 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| T35306 PRIMARY | Deere & Co (USA) |
NSN 5305-01-256-6873 is a Screw,cap,hexagon Head, manufactured by Deere & Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-256-6873 has 1 manufacturer part number on file: T35306 (Deere & Co).
Key specifications for T35306: Extended Washer Thickness: 0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN; Head Height: 0.610 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN; Fastener Length: 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Extended Washer Diameter: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.