The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-255-6546, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The American Society of Mechanical Engineers. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-255-6546 |
| Primary Part Number | B1821BH088F450D |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The American Society of Mechanical Engineers |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES THREADS |
| Head Height | 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| Fastener Length | 4.312 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 2.000 INCHES MINIMUM AND 2.188 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | SAE GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.875 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 1.285 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 10P STYLE AND 8 GRADE |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 14 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.123 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| B1821BH088F450D PRIMARY | The American Society of Mechanical Engineers (USA) |
| Reference | Meaning |
|---|---|
| MS18153-195 | 5/9 Secondary reference U.S. Government activity |
| B1821BH088F450D | 5/9 Secondary reference U.S. Government activity |
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-255-6546 is a Screw,cap,hexagon Head, manufactured by The American Society of Mechanical Engineers, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-255-6546 has 1 manufacturer part number on file: B1821BH088F450D (The American Society of Mechanical Engineers).
Key specifications for B1821BH088F450D: Surface Finish: 63.0 MICROINCHES THREADS; Head Height: 0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN; Fastener Length: 4.312 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.